It's a good thing that you saved the box!
Not that it is not always an easy thing to do. Look at the size of that thing!
This rather large box contains my Wife's GlowForge.
My Wife purchased this machine from her sister, who has become something of an early adopter when it comes to high tech, home crafting/manufacturing devices.
She bought a bigger, more powerful machine and no longer needed this earlier model. The price was attractive enough for my Wife to dip her toe into this laser technology.
My Wife is into quilting and she has several heavy duty sewing machines, one is a smaller 'long arm" machine. These machines sit on an equal number of specialized tables. Some are motorized, and all were assembled by me.
She had been into scrapbooking, but that was just a gateway before moving on to card and book making, as well as crafting assemblages.
My Wife has had a series of hobbyist computer controlled paper cutting machines: the Krikett, and the honestly named Scan and Cut.
The GlowForge announces itself as a 3 D printer on the box, but it really isn't. It is a computer controlled laser cutter, like a CNC machine. It cuts paper, chip board, wood in various thicknesses, acrylic and even thin metal. It can also etch designs on these materials.
Besides crafting items for her own entertainment, she also is involved in seasonal sales of her crafted Holiday items.
The GlowForge became indispensable in this process, it allows her to manufacture intricate designs rapidly, in mass quantities.
Unfortunately, the machine has recently developed some problems. My Wife is very good at watching tutorials online and contacting experts who have helped her in doing some minor repairs and maintenance. Recently though, it seemed as though the machine suffered a major malfunction, the laser tube wouldn't light up and the machine would not cut any longer, it just remained dark.
The machine is six years old, and the lifespan for these is a bit unknown. But I give my Wife a lot of credit; she did a thorough investigation of the cause of the malfunction, but was unable to repair it even with expert coaching. Then she sought out a business that could handle repairs on the machine, compared the price of that, against buying a new machine. Complicating matters is that company was struggling and had been sold to a new owner. Support for existing products was up in the air.
Now, these are not cheap products, nor are they something that the untrained should be messing around with. They're LASERS for Chrissake!
Luckily my Wife found that there was a business that provided product support, that was affiliated, but not part of the "new" company. They handle repairs and warranty issues.
With Silicon Valley being the birthplace of the high tech industry, you might assume that the GlowForge company would be based here or in Southern California. You might assume that they must have a retail sales presence in California. But you'd be wrong. The company made retail sales at Michael's stores and online, and by displaying their products at hobby/crafting/makers events.
It turns out that the company that repairs the machines is located in Alabama! The machine has to be shipped there for inspection and repair. This sophisticated and very sensitive device has to be boxed up and shipped by UPS.
Hence... It's a good thing that she kept the box. It had to go back inside the box and be sealed up for transport.
The internal mechanisms are secured with the factory padding and Styrofoam blocks and panels. The machine is surrounded by hard foam rubber and plastic rails. There were some "coffin handles" that secured the lid of the box to the inner box. It all went in without a lot of drama. She taped it up with strapping tape, and UPS came by and picked up the box.
This occurred just before the Fourth of July weekend and that resulted in a delay in arriving at the repair shop. We were both worried when the UPS guy tipped the box on it's side and spun it around to get his hand truck under it. We certainly hoped that everything was snug and secure inside the box. Travel time was a bit over nine days or so, and the shop took another three days to inspect and repair the laser.
The same UPS guy dropped it off at our house this morning and again he treated it like it was just another package.
As we were opening the box, I remarked that the box itself was looking a bit worse for wear, and I wondered if the box would be good enough for another trip, if needed. My Wife replied,"The next time it goes out, it's time for a new machine!" The cost for this refurbishment equaled the cost of the tires that I put on the Flex.
After getting the machine re-situated on it's table, we did some rearranging of the exhaust duct, and my Wife prepared to do a test run. It seemed to be working fine.
All's well that ends well, but what interested me about this episode was that this highly complex, high tech instrument is sold to regular consumers. It's not something that can be repaired by the uninitiated. But the owner can do some maintenance when needed, which I have helped my Wife with. That consists mostly of cleaning various assemblies.
Realistically It's a lot like a cell phone, lap top, or printer. These items are now cheap enough that if the consumer gets several years of use out of it, then they are satisfied. You just get a new machine when it breaks down.
I suppose that for most people cars are like that.
I have gotten 185,000 miles of service out of my truck over 19 years. Most people would have just traded it in for a newer model, probably years ago!
Well, that is the "first owner" mentality, as opposed to the cheapskate approach of buying used vehicles and running and fixing them until they are totally "used up" vehicles. Then that owner might decide to recondition and rebuild the machine to restore it to its useful and reliable function.
This approach has been rapidly losing ground in the modern world. For a number of reasons.
For one thing, the useful service life of many vehicles extends well over the 200,000 mile mark. By the time the vehicle reaches that mileage, and the rest of the vehicle is pretty much used up.
-------------------------------------------------
P.S. The machine was working great but the glass cover became loose from the hinge assembly. My Wife contacted the guys that rebuilt it. They referred her to a guy that has a metal channel to reinforce the joint and a special epoxy to rebind the glass back to the frame. The metal channel gives a positive physical connection. This fix should last for the lifetime of the machine.
This failure has resulted in my Wife looking at new laser machines. She has gotten used to having this device available and doesn't want to do her creative work without it.
I can't escape high tech at my house!
Oh no! Looks like another huge box that we'll have to save, showed up at the house!
This box contained her new X Tool, which is a higher powered and more sophisticated laser cutter, compared to her old GlowForge. The company has a showroom in Mountain View and my Wife attended a display/show/info meeting about the new machines. She was smitten and decided to buy one. As you might imagine the showroom was located here in the Bay Area, but the machine is built in China. For a long time Chinese built products were considered cheap junk, but that was more true because they were built to a low price point. There are many high quality manufacturers producing items that are built to high standards and are still priced attractively.
The X Tool has more features and more sophisticated functions that exceed her GlowForge's capabilities. She has been satisfied by the way the new unit works, and we hope that she will get many years of service out of it. We already had another table ready to accommodate it.
As I mentioned, these products are not cheap, but they were still priced lower than my used Heritage Softail. My Wife has her interests and I have mine, and she's been cool my stuff for a long time, so I am always ready to extend the same courtesy.
But we still have to find a place to put that box!
No comments:
Post a Comment